25mm Laser Beam Enhancement Components
Translation Mount for Laser Beam Expander/Collimator : TM-25
Translation Mounts are designed for the critical alignment of transmissive optics, such as placing a beam collimator within a pre-existing beam path.
When two mounts are used on each end of a component, translational and angular corrections can be made. The internal, sealed stage is adjusted via four ultra fine 1/4"-80 pitch screws within a ±2mm range. A self-aligning joint allows for the placement & removal of a componen t without affecting the beam path.
Haas part number TM-25-S-H shown above. Download technical drawings for each stock part number on the right. Download free Adobe PDF reader and SolidWorks Viewer on the left.
- Machined From Stainless Steel & Anodized Aluminum
- Sealed Design
- "Quick-Connect" Self-Aligning Joint
- 1/4"-80 Pitch Adjustment Screws
- ±2mm Adjustment Range
- 25mm Clear Aperture
- Sold in pairs
- Several additional mounting configurations available
Translation Mount (TM) Part Numbering Anatomy
for Laser Beam Expanders/Collimator
Additional options available upon request
We would be happy to discuss a custom designed solution that's right for any project, large or small. For additional information, contact a Haas Laser Technology sales representative today. (973) 598-1150
** Specifications subject to change without notice. Consult a Haas Laser Tech engineer for the latest specification changes or any additional assistance. **