25mm Laser Beam Enhancement Components

Quick Release Translation Mount for Laser Beam Expander/Collimator : TMQ-25

Quick Release Translation Mounts are designed for the critical alignment of transmissive optics, such as placing a beam collimator within a pre-existing beam path.

When two mounts are used on each end of a component, translational and angular corrections can be made. The internal, sealed stage is adjusted via four ultra fine 1/4"-80 pitch screws within a ±2mm range. A self-aligning joint allows for the placement & removal of a component without affecting the beam path. Each end of these mounts are split into two pieces, which allows for the full beam expander assembly to be easily removed and replaced without disturbing adjacent brackets.

Haas part number TMQ-25-S-H shown above. Download technical drawings for each stock part number on the right. Download free Adobe PDF reader and SolidWorks Viewer on the left.

Specifications TMQ-25

Quick release design means no disturbance of adjacent bracketry when removing beam expander
O-ring dust seals at both interfaces
Direct replacement for TM-25 Translation Mount
Machined From Stainless Steel & Anodized Aluminum
Sealed Design
"Quick-Connect" Self-Aligning Joint
1/4"-80 Pitch Adjustment Screws
±2mm Adjustment Range
25mm Clear Aperture
Sold in pairs
Additional mounting configurations available

Quick Release Translation Mount (TMQ) Part Numbering Anatomy
for Laser Beam Expanders/Collimator

TMQ-25

Input Hole Pattern*
H3	:	Haas 3 Hole
H4	:	Haas 4 Hole
TD	:	1.25"-32 Thread

Output Hole Pattern*
H3	:	Haas 3 Hole
H4	:	Haas 4 Hole
TD	:	1.25"-32 Thread

* End plates come with 1.25"-32 threaded through hole on optical center line

* See drawing for H3 and H4 hole pattern description

Additional options available upon request

We would be happy to discuss a custom designed solution that's right for any project, large or small. For additional information, contact a Haas Laser Technology sales representative today. (973) 598-1150

** Specifications subject to change without notice. Consult a Haas Laser Tech engineer for the latest specification changes or any additional assistance. **