UBMM-2-10.6   Universal OEM Laser Beam Modification Module

The Universal OEM Laser Beam Modification Module is designed specifically for the Universal Laser Systems OEM products. The module modifies the laser beam to equalize divergence in the X and Y axes by means of two ZnSe wedges. The two ZnSe wedges are designed to be held at the mean angles needed for the modification. An additional adjustment is provided for each wedge to fine tune for non nominal laser beams to ensure consistent results.

Features:

• (2) ZnSe wedges
• Adjustable Mounts for both wedges
• Sealed Housing
• Aluminum and Stainless Steel construction
• Bolts directly to OEM Universal Laser housing
• Use with OEM Universal Laser models: ULR-25/30, ULR-40, ULR-50/60, ULR-75

Before Modification:

After Modification:

UBMM-2-10.6-AK   Alignment Kit

The Alignment Kit provides easy alignment of the UBMM-2-10.6 Laser Beam Modification Module. Includes (2) micrometer heads and required additional components for fine pitch adjustment of the internal wedges. It is only required for initial alignment. Directions included. (UBMM-2-10.6 and UBMM-2-10.6-AK shown bolted to Universal Laser output front plate above).

Additional options available upon request

We would be happy to discuss a custom designed solution that's right for any project, large or small. For additional information, contact a Haas Laser Technology sales representative today. (973) 598-1150