Have a question?

Click below to contact a Haas engineer

 

White Paper - Download PDF

Click on the part number below to download a .zip file that contains technical drawings for the following file formats: .pdf .step .dxf .sldprt

g4-38-089-amx-cp_005
g4-38-089-127-amx-cp_006
g4-38-127-amx-cp_005
g4-38-127-191-amx-cp_005
g4-38-191-amx-cp_005
g4-38-191-254-amx-cp_005
g4-38-191-xyn-cp_005
g4-38-127-191-xyn-cp_005


For additional assistance, contact a Haas Laser Tech Engineer (973) 598-1150

 

White Paper - Download PDF

38mm Laser Process Heads

38mm Laser Head G4 Series

Laser Process Head : G4-38

The G4 Series Laser Process Head is designed for High-Speed Multi-Kilowatt Cutting Applications. Available with multiple focal length configurations.

Haas part number G4-38-127-AMX-CP shown above. Download technical drawings for each stock part number on the right. Download free Adobe PDF reader and SolidWorks Viewer on the left.

 

G4-38 Laser Head Features

 

G4-38 Laser Head Specifications

 

Laser Head Assembly : Part #G4-38-089-AMX-CP

    Specifications
Laser Process Head g4-38-089-AMX-CP  

G4-38-089-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provision for Ø1.5" x 3.5” EFL optic in Removable cartridge with X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling the optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -4mm +2mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Laser Head Assembly : Part #G4-38-089-127-AMX-CP

    Specifications
Laser Process Head g4-38-089-127-AMX-CP  

G4-38-089-127-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provisions for Ø1.5" x 5.0” EFL and Ø1.5" x 3.5” EFL optics in Removable cartridges with individual X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling each optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -4mm +2mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Laser Head Assembly : Part #G4-38-127-AMX-CP

    Specifications
Laser Process Head g4-38-127-amx-cp  

G4-38-127-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provision for Ø1.5" x 5.0” EFL optic in Removable cartridge with X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling the optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Laser Head Assembly : Part #G4-38-127-191-AMX-CP

    Specifications
Laser Process Head g4-38-127-191-AMX-CP  

G4-38-127-191-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provisions for Ø1.5" x 7.5” EFL and Ø1.5" x 5.0” EFL optics in Removable cartridges with individual X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling each optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Laser Head Assembly : Part #G4-38-191-AMX-CP

    Specifications
Laser Process Head g4-38-191-AMX-CP  

G4-38-191-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provision for Ø1.5" x 7.5” EFL optic in Removable cartridge with X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling the optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Laser Head Assembly : Part #G4-38-191-254-AMX-CP

    Specifications
Laser Process Head g4-38-191-254-amx-cp  

G4-38-191-254-AMX-CP

G4 Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provisions for Ø1.5" x 10” EFL and Ø1.5" x 7.5” EFL optics in Removable cartridges with individual X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling each optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

Dieboard Cutting Systems - G4 Laser Head Assemblies

 

G4 Laser Head Assembly

    Specifications
G4 Laser Head Assembly G4-38-191-XYN-CP  

Haas Part # G4-38-191-XYN-CP

G4 Die-Board Laser Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provision for Ø1.5" x 7.5” EFL optic in a Removable Cartridge with X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling the optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution for Travel of -15mm +5mm, X-Y Nozzle Tip Translation of ±1.5mm, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

 

G4 Laser Head Assembly

    Specifications
G4 Laser Head Assembly G4-38-127-191-XYN-CP  

Haas Part #G4-38-127-191-XYN-CP

G4 Die-Board Laser Process Head Assembly, 38mm Series, 34.8mm CA, Provisions for Ø1.5" x 7.5” EFL and Ø1.5" x 5.0” EFL optics in Removable Cartridges with individual X-Y Adjustment, ¼” Tube Compression Fitting for Assist Gas & Water Cooled Spacers with 6mm tube push fittings for cooling each optic.

Standard configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution for Travel of -15mm +5mm, X-Y Nozzle Tip Translation of ±1.5mm, T-M8 series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.
     

 

G4 Laser Process Head Accessories

 

Crash Protection & Detection Devices

    Specifications
G4 Laser Head Crash Protection  

Haas Part # G4-38-XYZ-S

2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage.

Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition.
     
Disposable Break Away Crash Protection  

Haas Part #G4-38-XYZ-BA:

Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laser process head from a crash condition.
     

 

 

Laser Process Head Assembly

    Specifications    
G4 Laser Head Optic Cartridges   G4-38-CART-2.5: Optic Cartridge for 1.5" dia. x 2.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.    
  G4-38-CART-3.5: Optic Cartridge for 1.5" dia. x 3.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.

G4-38-CART-5.0: Optic Cartridge for 1.5" dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.

G4-38-CART-7.5: Optic Cartridge for 1.5" dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.

G4-38-CART-10: Optic Cartridge for 1.5" dia. x 10" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.
         

 

 

Laser Nozzle Tip Stand-Off Adjusters

    Specifications
Nozzle Tip Stand off Adjusters  

TSA-3820QS-654:

Nozzle Tip Stand-off Adjuster. Rated at 25 Bar (365PSI). Laser-Marked Calibrated Rotary Barrel Adjustment. Adjustable zero-point setting. -15mm, +5mm Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (Minimum Focal Length 5.0")



TSA-3806QS-400:

Nozzle Tip Stand-off Adjuster Short. Rated at 25 Bar (365PSI). Laser-Marked Calibrated Rotary Barrel Adjustment. Adjustable zero-point setting. -4mm, +2mm Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (Minimum Focal Length 3.5")
     
38mm locking ring  

G4-38-QS20-LR

Locking Ring to secure TSA-3820QS series tip standoff adjuster to G4-38 laser head.
     
G4 38mm Locking Ring  

G4-38-QS06-LR

Locking Ring to secure TSA-3806QS series tip standoff adjuster to G4-38 laser head.
     

 

 

Laser Nozzle Tip Holders

    Specifications
Nozzle TIp Holders   NZL-3029-625-XXX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle.

NZL-3029-M8-XXX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle.

NZL-3029-625-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. MCX Connector.

NZL-3029-625-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. SMA Connector.

NZL-3029-M8-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector.

NZL-3029-M8-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.

NZL-3029-M8-FMX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector.

NZL-3029-M8-FSX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.
     

 

 

Laser Nozzle Tips

    Specifications    
Nozzle Tips  

Consider only M8 Series Nozzle Tips & 5/8" Series Nozzle Tips
  www.haaslti.com/accessories/nozzle-tips.html
         

 

Accessories & Related Products

 

Cartridge Crosshair Target

    Specifications
Cross Hair Laser Target  

Haas Part #G4-38-TGT

Cross Hair Target Cartridge used for aligning the laser beam through the process head. Brass and Aluminum construction.
     

 

 

Optic Wrench

    Specifications
OW-150-131 Optic Wrench  

Haas Part #OW-150-131

The Optic Wrench has an anodized aluminum construction and is specifically designed for tightening and loosening the Optic Locking Ring. Fits Ø1.310” ID Locking Rings.
    Download Technical Drawing

 

 

Sealing Cartridge

    Specifications    
Sealing Cartridge  

Haas Part #G4-38-CART-SC

Sealing Cartridge (No Optic)

    
 
         

 

 

Cover Glass Cartridge

    Specifications    
Cover Glass Cartridge  

Haas Part #G4-38-CART-CG

Optic Cartridge Assembly for Cover Glass.

    
 
         

 

 

Q-Series Wrench

    Specifications    
Q-Series Wrench  

Haas Part #TSA-38-QRW

Wrench, Lock Ring for 38mm TSA-QS Series.

    
 
         

 

 

Fittings

    Specifications    
G4 laser head fittings  

Haas Part #FIT-CM-25-BSP-PR

Fitting, Assist Gas, 1/4 Tube, 1/8 BSPP, High Pressure

 

    
 

Haas Part #FIT-PU-1/8B-6MM-K163

Fitting, Cooling, Push Lock, 6mm Tube to 1/8" ISO
         

 

 

Optic Cartridge Seal Kit

    Specifications    
Optic Cartridge Seal Kit  

Haas Part #G4-38-CART-SK

Optic Cartridge Seal Kit (Top & Bottom Seals)

    
 
         

 

 

Thumb Screw

    Specifications    
G4 Laser Head Thumb Screw  

Haas Part #G4-38-TS-5M

Thumb Screw, M5, for G4 Cartridge

    
 
         

 

 

Locking Rings

    Specifications    
G4 Laser Head locking rings  

Haas Part #LRO-1625-32-35-XX-32-S

Locking Ring, Ø1.625”-32 x .125”, SS. Optical Edge Thickness has a minimum of 3mm and maximum of 6mm.

    
 

Haas Part #LRO-1625-32-35-38-60-S

Locking Ring, Ø1.625"-32 x .235" with step, SS, G4. Optical Edge Thickness has a minimum of 6mm and maximum of 8mm.
         

 


Sign up for our
Quarterly Email Newsletter

Stay informed with laser industry news and new product releases

Laser News
 Join Haas Laser Tech

Check out our
Technical Center

Read white papers and articles, watch laser videos and learn more about optic design.
Haas Technical Center »