Contact Us

 

 

38mm Laser Process Heads

G5-38 Laser Process Head

The G5 Series Laser Process Head is designed for High-Speed Multi-Kilowatt Cutting Applications. The G5 Series provides additional Z-Axis adjustment of the focus lens cell to compensate for varying High-Pressure Optic Thickness. Internal water passage reduces outside cooling lines on multiple focal length configurations.

Haas part number G5-38-127-191-AMX shown above. Download technical drawings for each stock part number on the right. Download free Adobe PDF reader and SolidWorks Viewer on the left.

 

G5-38 Features

• X-Y-Z Adjustable Optic Cartridge Design
• Up to +/- 5mm Z Optic Cartridge adjustment for different optic thickness
• Internal Cooling of Multiple Optic Configurations
• Crash Detection and Protection Options
• Calibrated Nozzle Tip Stand-off Adjustment
• Water-Cooled Optics
• Gas Jet Manifold
• Multiple Optic Options
• Available for a Wide Variety of Optics
• Modular Design for Custom Configurations
• All Metric Stainless Steel Hardware
• Order Optics separately

 

G5-38 Specifications

• 34.8mm Clear Aperture
• Uses Standard 1.5" dia. Optics
• Rated up to 6KW
• Gas Jet Pressure Rated to 25 Bar (365PSI)
• Anodized Aluminum, Brass, and Stainless Steel Construction
• Robust Design

 

Laser Process Head Assembly : Part #G5-38-127-AMX-CP

		Specifications
		G5 Laser Process Head Assembly, 38mm Series, 34.8mm Optic CA, Provision for Ø1.5" x 5.0” EFL Optic in a Removable Cartridge with Individual X-Y Translation and Focal Adjustment, ¼” O.D.Tube Compression Fitting for Assist Gas, Water Cooled Spacer for Optics with 6mm O.D. Tube Connections. Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

 

 

Laser Process Head Assembly : Part #G5-38-127-191-AMX-CP

		Specifications
		G5 Laser Process Head Assembly, 38mm Series, 34.8mm Optic CA, Provisions for Ø1.5" x 5.0” EFL and Ø1.5" x 7.5” EFL Optics in Removable Cartridges with Individual X-Y Translation and Focal Adjustments, ¼” O.D.Tube Compression Fitting for Assist Gas, Water Cooled Spacers for each Optic with 6mm O.D. Tube Connections. Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

 

 

Laser Process Head Assembly : Part #G5-38-191-AMX-CP

		Specifications
		G5 Laser Process Head Assembly, 38mm Series, 34.8mm Optic CA, Provision for Ø1.5" x 7.5” EFL Optic in a Removable Cartridge with Individual X-Y Translation and Focal Adjustment, ¼” O.D. Tube Compression Fitting for Assist Gas, Water Cooled Spacer for Optics with 6mm O.D. Tube Connections. Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

 

 

Laser Process Head Assembly : Part #G5-38-191-254-AMX-CP

		Specifications
		G5 Laser Process Head Assembly, 38mm Series, 34.8mm Optic CA, Provisions for  Ø1.5" x 7.5” EFL and Ø1.5" x 10” EFL Optics in Removable Cartridges with Individual X-Y Translation and Focal Adjustments, ¼” O.D. Tube Compression Fitting for Assist Gas, Water Cooled Spacers for each Optic with 6mm O.D. Tube Connections. Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

 

 

Laser Process Head Assembly : Part #G5-38-254-AMX-CP

		Specifications
		G5 Laser Process Head Assembly, 38mm Series, 34.8mm Optic CA, Provision for  Ø1.5" x 10” EFL Optic in a Removable Cartridge with Individual X-Y Translation and Focal Adjustment, ¼” O.D. Tube Compression Fitting for Assist Gas, Water Cooled Spacer for Optics with 6mm O.D. Tube Connections. Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

 

G5 Laser Process Head (G5) Accessories

 

Laser Crash Protection & Dection Devices

		Specifications
		Haas Part #G5-38-XYZ-S: 2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition. Haas Part #G5-38-XYZ-BA: Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laser process head from a crash condition.

 

Laser Process Head Assembly

		Specifications
		Haas Part #G5-38-C-127: Optic Cartridge for 1.5” dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Focus can be adjusted +4.0mm / -4.5mm independent from Tip Stand Off. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.
		Haas Part #G5-38-C-191 : Optic Cartridge for 1.5” dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Focus can be adjusted +5.0mm / -7.0mm independent from Tip Stand Off. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. Haas Part #G5-38-C-191L : Optic Cartridge for 1.5” dia. x 7.5" F.L. Focus Lens when used as Lower Cartridge. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Focus can be adjusted +4.0mm / -4.5mm independent from Tip Stand Off. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place Haas Part #G5-38-C-254 : Optic Cartridge for 1.5” dia. x 10.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Focus can be adjusted +5.0mm / -7.0mm independent from Tip Stand Off. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.

 

Laser Sealing Cartridges

		Specifications
		Haas Part# G5-38-CART-EC-L: Sealing Cartridge (Lower) used to seal Cartridge Retainer when Optic Cartridge is not in use. Seals assist gas pressure. Haas Part# G5-38-CART-EC-U: Sealing Cartridge (Upper) used to seal Cartridge Retainer when Optic Cartridge is not in use. Seals assist gas pressure.

 

Laser Nozzle Tip Stand-Off Adjusters

		Specifications
		Haas Part# TSA-3820G5-558: Nozzle Tip Stand-off Adjuster. Rated at 25 Bar (365PSI). Laser- Marked Calibrated Rotary Barrel Adjustment, Adjustable zero-point setting. +5/-15 Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design.(Other models available for specialized applications)

 

 

Nozzle Tip Holders

		Specifications
		NZL-3029-625-XXX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. NZL-3029-M8-XXX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. NZL-3029-625-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. MCX Connector. NZL-3029-625-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. SMA Connector. NZL-3029-M8-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector. NZL-3029-M8-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector. NZL-3029-M8-FMX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector. NZL-3029-M8-FSX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.

 

 

Nozzle Tips

		Specifications
		Machined from copper - all Haas original or replacement laser nozzel tips are available with straight or tapered tips.
		View all available stock 'Nozzle Tips' styles.

 

Accessories & Related Products

 

G5 Laser Optic Wrenches

		Specifications
		OW-150-131 Optic Wrench for Ø1.310" ID Optic Locking Ring OW-150-137 Optic Wrench for Ø1.370" ID Optic Locking Ring OW-200-187 Optic Wrench for Ø1.870" ID Optic Locking Ring used for G5 Lens Cartridge focus adjustments.

 

 

Cross Hair Target Cartridge

		Specifications
		Haas Part# G5-38-TGT: Cross Hair Target Cartridge used for aligning the laser beam through the process head. Brass and Aluminum construction.

 

 

Locking Rings

		Specifications
		LRO-1625-32-35-38-76-A Locking Ring, Ø1.625”-32 x .300” With Step, AL, G4 LRO-1625-32-32-XX-32-S Locking Ring, Ø1.625”-32 x .125”, SS LRO-1625-32-32-38-60-S Locking Ring, Ø1.625"-32 x .235" with step, SS, G4

 

 

Fittings

		Specifications
		Haas Part #FIT-CM-25-BSP-PR Fitting, Assist Gas, 1/4 Tube, 1/8 BSPP, High Pressure
		Haas Part #FIT-PU-1/8B-6MM-K163 Fitting, Cooling, Push Lock, 6mm Tube to 1/8" ISO

 

 

Miscellaneous

		Specifications
		G5-38-CART-SK Optic Cartridge Seal Kit (Top & Bottom Seals)