Have a question?

Click below to contact a Haas engineer

 

White Paper - Download PDF

Click on the part number below to download a .zip file that contains technical drawings for the following file formats: .pdf .step .dxf .sldprt

g4-50-127-amx-cp_029
g4-50-127-191-amx-cp_029
g4-50-191-amx-cp_029
g4-50-191-254-amx-cp_029
g4-50-254-amx-cp_029


For additional assistance, contact a Haas Laser Tech Engineer (973) 598-1150

 

White Paper - Download PDF

50mm Laser Process Heads

50mm Laser Process Head G4 Series

Laser Process Head : G4-50

The G4 Series Laser Process Head is designed for High-Speed Multi-Kilowatt Cutting Applications. Available with multiple focal length configurations.

Haas part number G4-50-127-191-AMX-CP shown above. Download technical drawings for each stock part number on the right. Download free Adobe PDF reader and SolidWorks Viewer on the left.

 

G4-50 Features

 

G4-50 Specifications

 

Laser Process Head Assembly : Part #G4-50-127-AMX-CP

    Specs    
G4-50-127-AMX-CP  

G4-50-127-AMX-CP

G4 Laser Process Head Assembly, 50mm Series, 47mm Optic CA, Provision for Ø2.0" x 5.0” EFL Optic in a Removable Cartridge with Individual X-Y Translation, ¼” Tube Compression Fitting for Assist Gas, Water Cooled Spacer for Optics with 6mm O.D Tube push-to connect fittings.

Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

   
 
         

 

 

Laser Process Head Assembly : Part #G4-50-127-191-AMX-CP

    Specs    
G4-50-127-191-AMX-CP  

G4-50-127-191-AMX-CP

G4 Laser Process Head Assembly, 50mm Series, 47mm Optic CA, Provisions for Ø2.0" x 5.0” EFL and Ø2.0" x 7.5” EFL Optics in Removable Cartridges with Individual X-Y Translation, ¼” Tube Compression Fitting for Assist Gas, Water Cooled Spacers for each Optic with 6mm O.D.Tube push-to-connect fittings.

Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

   
 
         

 

 

Laser Process Head Assembly : Part #G4-50-191-AMX-CP

    Specs    
G4-50-191-AMX-CP  

G4-50-191-AMX-CP

G4 Laser Process Head Assembly, 50mm Series, 47mm Optic CA, Provision for Ø2.0" x 7.5” EFL Optic in a Removable Cartridge with Individual X-Y Translation, ¼” Tube Compression Fitting for Assist Gas, Water Cooled Spacer for Optics with 6mm O.D. Tube push-to-connect fittings.

Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

   
 
         

 

 

Laser Process Head Assembly : Part #G4-50-191-254-AMX-CP

    Specs    
G4-50-191-254-AMX-CP  

G4-50-191-254-AMX-CP

G4 Laser Process Head Assembly, 50mm Series, 47mm Optic CA, Provisions for Ø2.0" x 7.5” EFL and Ø2.0" x 10” EFL Optics in Removable Cartridges with Individual X-Y Translation, ¼” Tube Compression Fitting for Assist Gas, Water Cooled Spacers for each Optic with 6mm O.D. Tube push-to-connect fittings.

Standard Configuration includes 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Quick Connect/Release Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution Scales and a Travel of -15mm +5mm, Capacitive Height Sensing Body, T-M8 Series Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

   
 
         

 

 

Laser Crash Protection & Detection

    Specs    
Crash Protection and Detection   Haas Part # G4-50-XYZ-S : 2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition.


Haas Part # G4-50-XYZ-BA : Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laser process head from a crash condition.
   
 
         

 

Laser Head Assembly

    Specs    
Laser Head Assembly   G4-50-C-127 : Optic Cartridge for 2.0” dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.    
  G4-50-C-191 : Optic Cartridge for 2.0” dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.

G4-50-C-254 : Optic Cartridge for 2.0” dia. x 10.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place.
         

 

Nozzle Tip Stand-Off Adjusters

    Specs    
Nozzle Tip Stand off Adjusters  

TSA-5020-687

Nozzle Tip Stand-off Adjuster. Rated at 25 Bar (365PSI). Laser- Marked Calibrated Rotary Barrel Adjustment, Adjustable zero-point setting. +5/-15 Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design.

(Other models available for specialized applications)

   
 
         

 

 

Nozzle Tip Holders

    Specs    
Nozzle TIp Holders   NZL-3329-M8-XXX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle.

NZL-3329-M8-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector.

NZL-3329-M8-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.

NZL-3329-M8-FMX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector.

NZL-3329-M8-FSX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.
   
 
         

 

 

Sealing Cartridges

    Specs    
 

G4-50-CART-SC Sealing Cartridge used to seal Cartridge Retainer when Optic Cartridge is not in use. Seals assist gas pressure.

   
         

 

Accessories & Related Products

 

Optic Wrench

    Specs    
Optic Wrench   OW-50-1850 Optic Wrench for Ø1.850" ID Optic Locking Ring    
 
         

 

Cross Hair Target

    Specs    
Optic Wrench   G4-50-TGT Cross Hair Target Cartridge (Upper) used for aligning the laser beam through the process head. Brass and Aluminum construction.    
 
         

 


Sign up for our
Quarterly Email Newsletter

Stay informed with laser industry news and new product releases

Laser News
Join Haas Laser Tech

Check out our
Technical Center

Read white papers and articles, watch laser videos and learn more about optic design.
Haas Technical Center »