Capacitive Height Sensing System

The CHS-500S measures the nozzle tip stand-off distance and converts the measurement into an analog output signal. After initial calibration, the on-board 16-bit DA provides an analog output signal to tip stand-off. Calibration can be achieved by manual panel entry, PMC entry via 24 VDC I/O or PMC entry via EtherCAT.

For use with conductive materials. Non-conductive materials require a tactile adapter (TTA-3029-M8-AMX) in place of the capacitive height sensing nozzle.

CHS-500S Features

• Sampling rate: 1000 Hz
• Static measurement accuracy: 0.001mm
• Standard range: 0.1-5.1mm
• Vibration suppression function
• ± 10 VDC analog output signal in sensor control mode
• 0-10 VDC analog output signal in distance control mode
• Cable disconnected or break alarm
• Tip touch alarm
• Outside of measurement range alarm

CHS-500S Specifications

• Rated Voltage: 24 VDC ±10%
• Rated Current: 1 A
• Workpiece: Electrically Conductive. Connected with GND
• Analog Output: DC 0-10V
• Response frequency: 1000 Hz
• Operating Temperature: 0-40° C
• Stock temperature: -10 - +50° C
• Output impedance: 3000 Ω
• Control box dimensions: 8.7in [221mm] L x 4.7in [119.4mm] W x 2in [50.8mm] H